Cookie Img
Send Inquiry Send SMS
Home » Products » Industrial Sensor » Non Contact IR Temperature

Non Contact IR Temperature



<< Previous   Non Contact IR Temperature
Product Description

del

        Output

Overall Temp.  Ran

                  Accuracy


Kimo Portable Infra-red Thermometer for surface temperature measurement

Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe


To measure surface temperatures of hot objects, dangerous or difficult to access.

 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 


  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 

  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 

  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 

  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 
  Kimo Portable Infra-red Thermometer for surface temperature measurement
 
Infrared thermometer Kiray 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting,  it allows easy  and accurate measurements of little distant targets. The KIRAY 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.
 
To measure surface temperatures of hot objects, dangerous or difficult to access.
 
Technical Features:
 
Spectral response.......................8 - 14 ÃŽ¼m
Optical..........................................D.S : 50:1 (50.8 mm at 2540 mm)
Temperature range......................From -50 to +1850°C
Accuracy*....................................From -50 to +20°C : ±3°C
                                                     From +20 to +500°C : ±1% ±1°C
                                                     From +500 to +1000 °C : ±1.5%
                                                     From +1000 to +1850°C : ±2%
Infrared repeatability...................From -50 to +20°C : ±1.5°C
                                                  From +20 to +1000°C : ±0.5% or ±0.5°C
                                                  From +1000 to +1850°C : ±1%
Display resolution.......................0.1°C
Response time.............................150 ms
Emissivity....................................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication ................Display indication : « ---- »
Dual laser sighting......................Wavelength : from 630 nm to 670 nm
                                                  Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive temperature)
                                                 (-) sign for a negative temperature
Display.........................................3 lines, 4 digits with backlighted display LCD
Auto-extinction............................Automatic after 7 seconds of inactivity
High/low alarm.............................Flashing signal on display and beep signal with adjustable thresholds
Power supply...............................Alkaline 9V battery
Autonomy....................................95 h (inactive laser and backlight) 15 h (active laser and backlight)
Use temperature..........................From 0 to +10°C for a short period From +11 to +50 °C for a long period
Storage temperature...................From -10°C to +60°C
Relative humidity........................From 10 to 90%RH in operating mode and lower than 80%RH in storage
Dimensions..................................200 x 140 x 50 mm
Weight..........................................320 g (included battery)
Memory........................................100 temperature values
 
        Application :
 
Steel plants
Furnace
Boilers
Thermal power plants
Coal Mines
Shipping
Marine
Nuclear plants
 
 
 
 
 
 
 

 

 

  •  

  •  

  •  

Product Code : 04

Other Products in 'Industrial Sensor' category
Laser Sensor
Laser Sensor
Fibre Optic Sensor
Fibre Optic Sensor
Photoelectric Sensors
Photoelectric Sensors
Colour Mark Sensor
Colour Mark Sensor
Thru Beam Sensor
Thru Beam Sensor
Incremental Encoder
Incremental Encoder
 
View all products(11)
 
<< Back


SENSOR & CONTROL SYSTEM
Head Office: A-16, Ramkrishna Park, Sodepur, Kolkata - 700110, West Bengal, India
Mr. Suvendu Ghosh (MD)
Send SMS Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
SENSOR & CONTROL SYSTEM All Rights Reserved.